graph 1.84.1
The purpose of this document is to describe the implementation of the classes used to represent graphs in the graph package and to discuss design issues for future development.
There are many different ways to represent a graph and to deal with the edges and nodes within that graph. Below we discuss the graph representations implemented in the graph package and define the set of methods that form the graph interface as determined empirically by the methods used by packages like RBGL when interacting with graph objects.
A graph is a pair of sets, \(G=(V,E)\) where \(V\) is the set of nodes and \(E\) is the set of edges, which are determined by relationships that exist between the nodes. If we let \(n = |V|\) be the number of nodes, then, excluding self-loops, there are at most \(n\) choose 2 edges in \(G\). A simple graph is a graph with at most one edge between any pair of nodes and no self-loops.
The graph class and its subclasses support simple graphs as well as graphs with at most one self-loop on any given node. Not all graph representations can easily support more general graphs. Limiting to simple graphs with self-loops allows for reversible conversions between different graph representations. Furthermore, this limitation simplifies the interface of edge related methods which would otherwise have to support ways of identifying one of many edges between the same pair of nodes.
Arbitrary attributes can be associated with a graph, a node, or an edge. For both nodes and edges, if one edge or node has a particular attribute then all nodes and edges must have that attribute. Nodes and edges can have more than one attribute associated with them.
This raises the question of whether we should use the AnnotatedDataFrame class from Biobase here as a way to implement general node and edge attributes.
However, currently AnnotatedDataFrame is based on a data frame and cannot easily support arbitrary attributes. Even having a vector of length greater than one as the value of an attribute could cause problems.
The graph class itself is VIRTUAL and has the following definition:
library("graph")getClass("graph")## Virtual Class "graph" [package "graph"]
##
## Slots:
##
## Name: edgeData nodeData renderInfo graphData
## Class: attrData attrData renderInfo list
##
## Extends: "graphBase"
##
## Known Subclasses: "graphNEL", "graphAM", "distGraph", "clusterGraph", "graphBAM"The edgemode slot indicates whether the graph is directed or undirected. Since some graph algorithms only make sense in a directed graph, the edgemode is a property of the entire graph rather than a property of an edge.
The graphData slot was recently added to hold arbitrary attributes for the graph. Although edgemode is such an attribute, it isn’t clear whether it should move inside the generic container, since edgemode is of such high semantic importance. It probably doesn’t matter as long as methods such as isDirected do the right thing.
The edgeData and nodeData slots store the attributes for the edges and nodes of the graph, respectively.
There are currently implementations for the graphNEL class, where nodes are a vector and edges are a list, each element of the list corresponds to one node and the values are nodes corresponding to the out-edges from that node. If the graph is directed then all edges essentially appear twice.
The graphAM class stores the edge information in an adjacent matrix. The matrix must be square and the row names must match the column names. If the graph is undirected, then the matrix must also be symmetric.
There are two specialized classes. The first is distGraph, which takes a distance matrix directly and has special thresholding capabilities. It is not clear whether this should be a specialization of the graphAM class or not.
The second specialized class is a clusterGraph, which can be used to represent the output of a clustering algorithm as a graph. Samples represent nodes and all samples in the same cluster have edges, while samples in distinct clusters do not. Instances of this class must have their edgemode as undirected. If the edgemode is reset, then coercion to some other mode of graph is needed.
Here are some of the methods that all graph-like objects should support:
nodes(object) Returns a character vector of the node labels. The order is not defined.
nodes<-(object) Returns a new graph object with the node labels set as specified by a character vector. This is slightly fragile since the order matters. But the order can only really be determined by first calling the R function, nodes, and then providing a character vector of the appropriate length.
addNode(node, object, edges) Returns a new graph object with additional nodes and (optionally) edges. The methods that have been implemented expect node to be the node labels of the new nodes specified as a character vector. Optional edges can be specified.
removeNode(node, object) Returns a new graph object with nodes (and their incident edges) removed. Current methods are implemented for node being a character vector of node labels to remove.
edges(object, which) Returns a list with an element for each node in the graph. The names of the list are the node labels. Each element is a character vector giving the node labels of the nodes which the given element shares an edge with. For undirected graphs, reciprocal edges should be included. This representation is very similar to the NEL edgeL structure.
edgeWeights(object, index)
addEdge(from, to, graph, weights) Returns a new graph object with additional edges.
removeEdge(from, to, graph) Returns a new graph object with the specified edges removed.
numNodes(object) Returns a count of the nodes in the graph.
numEdges(object) Returns a count of the edges in the graph.
isDirected(object) Returns TRUE if the graph is directed, and FALSE otherwise.
acc(object, index) See man page.
adj(object, index) See man page.
nodeData Access to node attributes. See man page.
edgeData Access to edge attributes. See man page.
Once both nodes and edges are instances of classes, they will be quite large. In order to reduce the storage requirements (especially for large graphs), using integer indices may be beneficial.
The minimum amount of storage required is \(|V|+|E|\). If we use an incidence matrix representation, then the storage is \(|V|^2\). If we use a node and edge list representation, then the storage requirements are \(|V|+2|E|\). When either \(|V|\) or \(|E|\) are large, these mechanisms will not be efficient. In some cases, it may be better to keep the actual node and edge data stored in hash tables and keep other integer vectors available for accessing the necessary components.
We have taken the approach of allowing the representation of the edge sets to not contain every node. When the graphs are sparse, this can be a fairly large savings in space, but it means that one cannot determine the nodes in a graph from the edges in the graph.
Also, for the graphNEL class, we do not store the names of the nodes in the NEL, but rather index into a the node vector. This is important for allowing us to perform permutations on the nodes of a graph, but causes a number of problems when subsetting graphs, and it means that knowledge of the edges does not provide knowledge of the nodes.
There are no clear and widely used definitions for multi-graphs. So here, we will make a clear definition that we believe will be useful for biological computations. We define a multi-graph as a graph that consists of two components - one, a set of nodes and the second, a list of edge sets. Each edge set corresponds to a potentially different set of relationships between the nodes (which are common to all edge sets). We denote this by \(G=(V, E_L)\), where \(V\) is the set of nodes and \(E_L = (E_1, \ldots, E_L)\) is a collection of \(L\) edge sets, each with a potentially distinct set of relationships. The edge sets are essentially identical to the edge sets for a graph, and hence can have arbitrary attributes associated with them. The edges can be either directed or undirected and self-loops are allowed.
It is not clear whether there should be distinct types of multi-graphs as there are graphs. It will surely be more flexible to support a list of edge sets, and to allow these to have different structures.
Current definition does not extend the graph class. The definition is:
getClass("multiGraph")## Class "multiGraph" [package "graph"]
##
## Slots:
##
## Name: nodes edgeL nodeData graphData
## Class: vector list attrData listnodes A vector of node identifiers.
edgeL A possibly named list of instances of the edgeSet class.
The edgeSet class is a virtual class with several different extensions. These include a edgeSetNEL and an edgeSetAM. Others will be added once the interface stabilizes.
Edge attributes are in the edgeData slot in the edgeSet class. This implies that edgeSets in a multiGraph can have completely unrelated edge attributes. Another approach would be to maintain a list conforming to the edgeSet list containing edge attributes that would enforce the same attributes to be defined for all edges in the multiGraph.
In some ways, it would be most natural to have edges methods for the edgeSet class. The issues raised in Section 2.2.1 seem to preclude this and it only seems to make sense to have node and edges methods for the multiGraph class.
It will probably make sense to be able to name the edgeSets within a multiGraph and to be able to extract graph objects from the multiGraph representing any of the edgeSets.
There should be methods to produce graph objects based on intersection, union, and more complex combination algorithms. The edgeSets may represent interaction data with reliability estimates as edge weights. The user may want to produce a graph object combining the available data to obtain most reliable edges.
We may want to consider apply type operations to apply an operation across all edgeSets in a multiGraph.
An important motivator for the multiGraph class is the representation of data from protein interaction experiments. Our goal is to represent these data in terms of what interactions were tested, and of those which ones are either positive or negative.
A bipartite graph graph is a graph where the nodes can be divided into two sets, say \(V_1\) and \(V_2\), such that all edges are between members of \(V_1\) and members of \(V_2\), and there are no edges between any two elements of \(V_1\), nor of \(V_2\).